We are working on getting pictures and descriptions for all products but we are ready to serve you.
1/4" Meg Stainless Spray Tips with Vane — All Sizes
From
$9.04
Stainless steel 1/4" Meg spray tips fitted with a vane, across the available angle and flow range. Select your size from the dropdown.
The vane is the distinguishing feature. It conditions flow entering the orifice, producing a more stable, better-formed spray pattern than a plain tip at the same rating. On surface cleaners in particular, where multiple tips are working together on a rotating bar, pattern stability is what determines whether you get a uniform finish or visible banding.
These are commonly specified on Whisper Wash surface cleaners and comparable professional machines where consistent output across every tip on the bar is what the machine's performance depends on.
Orifice size has to match your machine's actual flow output. A tip rated below your GPM drives system pressure up and strains the pump; one rated above it bleeds off pressure and costs you cleaning force. This is the single most common sizing mistake in pressure washing. On a multi-tip surface cleaner bar, every tip must be the same rating — mismatched tips produce uneven cleaning that shows up immediately as streaking.
Spray tips are wear items, and they fail quietly. Grit passing through at high pressure gradually erodes the orifice, which widens the pattern and drops impact force long before the tip looks worn. A machine that seems to have lost pressure very often just needs fresh tips — check those before you start diagnosing the pump. On surface cleaners, replace the full set at once rather than individually; uneven wear between tips on the same bar is one of the most common causes of striping.
Frequently Asked Questions
What does the vane do? It conditions flow entering the orifice, producing a more stable and better-formed spray pattern than a plain tip.
What are these typically used on? Whisper Wash surface cleaners and comparable professional machines where consistent output across the bar matters.
Should I replace all the tips on my bar at once? Yes. Mismatched wear between tips on the same surface cleaner bar is a leading cause of streaking.
How do I choose the size? Match the total flow across all tips on the bar to your machine's GPM output.
Why stainless? It resists chemical corrosion and holds orifice dimension longer under abrasive flow than brass.
Quantity
