We are working on getting pictures and descriptions for all products but we are ready to serve you.
1" MPT x 3/4" FPT Reducing Bushing Banjo
$4.20
1" MPT x 3/4" FPT Reducing Bushing Banjo. A bushing reduces one thread size down to another, letting you connect components that don't share a common size.
Poly and PVC fittings are chemically inert, which makes them the correct choice for chemical lines and softwash plumbing where brass and steel would corrode. They're not rated for high pressure — keep them on the supply and chemical side of the system.
Getting fitment right comes down to three things: thread type, thread size, and pressure rating. NPT threads taper and seal on the thread itself, which is why thread sealant or PTFE tape is needed on the male side. Mixing thread standards — NPT against BSP or metric — will either refuse to thread or leak under pressure even when it seems to fit by hand.
Grime Task Force stocks fittings across materials and sizes because a rig is only as reliable as its plumbing, and a single wrong or failing fitting can shut down a job. Keeping common sizes on the truck turns most plumbing failures into a short delay instead of a lost day.
Frequently Asked Questions
What size and type is this fitting? 1" MPT x 3/4" FPT Reducing Bushing Banjo — confirm against your existing plumbing before ordering.
Do I need thread sealant? Yes on NPT male threads. Use PTFE tape wound clockwise or a liquid thread sealant; NPT seals on the threads themselves, not on a gasket.
Which material should I choose? Stainless for chemical service, brass for general water, plated steel for economical clean water use, and poly or PVC for chemical and low-pressure lines.
Quantity
